Mining
Products
Products for this industry
Macropoxy® 2600
Direct-to-metal epoxy for atmospheric, maritime and heavy industrial corrosion protection. MIO loading for edge, corner and weld protection. For water, pharmaceutical, food, mining, marine, power, oil/gas applications.
Acrolon® 400
A high-solids acrylic-polyester polyurethane with fast drying and high gloss, designed for applications requiring long-term gloss and color retention in exterior environments.
Envirolastic 980 PA
Poliuretano de secagem rápida com aplicação em demão única, minimiza contaminação por poeira e permite manutenção no mesmo turno.
Zinc Clad® IV-80
Zinco com 80% em película seca para proteção catódica. Fácil aplicação com pincel, spray ou airless.
Sher-Glass GF
Epóxi reforçado com flocos de vidro com até 500µm de espessura seca em demão única, eliminando primers separados.
Macropoxy® 851
A 100% epoxy polyamine amide modified coating designed to protect steel and concrete in industrial environments. Can be applied directly to marginally prepared steel surfaces.
Heat-Flex® 3500
Single-component isolation coating for substrates operating from -62°C to 177°C
Cor Cote® HCR FF
Reinforced version of Cor Cote HCR with fiberglass for greater chemical and mechanical resistance.
Cor Cote® HCR
High-performance hybrid epoxy with 100% solids, resistant to aggressive acids, alkalis and solvents. Formulated for rapid installation.
Heat-Flex 750
High-solids alkyd epoxy reinforced with micaceous iron oxide for corrosion resistance and high-temperature protection. Suitable for process tubes, valves and vessels operating from -196°C to 204°C with peaks at 232°C. For carbon and stainless steel.
Heat-Flex® 1200 Plus
Resists CUI and stress corrosion cracking per NACE SP0198:2017. Operating from -196°C to 646°C. For high-temperature, mining, power generation and oil/gas.
Macropoxy SP 530
Macropoxy SP 530 is the former SUMADUR SP 530. There were no changes to product codes or technical characteristics. From 2026, local naming was aligned with the Sherwin-Williams global polyurethane and epoxy brands. Wash primer replacement compatible with epoxy, polyurethane, and acrylic topcoats
Heat-Flex® 5000
Two-component enamel formulated with modified silicone resin offering high performance and corrosion resistance at elevated temperatures.
Phenicon Primer BR
Epoxy primer with superior chemical resistance and hardness
Admiral Enamel
Acabamento brilhante com excelente aspecto decorativo e alto poder de cobertura
Zinc Clad II (85)
Revestimento que se regenera para proteção catódica com proteção em caso de danos.
NovaPlate UHS
Proteção superior com alta espessura por demão e excelente retenção em bordas.
Nova-Plate 360
Altamente versátil com flocos reforçados. Revestimento novolac para tanques com excelente resistência química.
Epo-Phen FF
Epóxi fenólico para serviço de imersão em água e hidrocarbonetos. Alta resistência química.
Nova-Plate 325
Alta proteção em única demão com baixo VOC e elevadíssima espessura.
Macropoxy HS 95
Primer/topcoat at up to 500µm single coat. Applicable at 95% humidity on damp surfaces. Coal-tar-free, ISO 12944 C5-H. For steel mills, chemical, hydroelectric, oil/gas, mining.
Acrolon 7300
Poliuretano acrílico com excelente resistência à intempérie e retenção de cor e brilho.
Sumadur 2628
Epoxy topcoat for carbon steel in aggressive environments with high humidity and salt spray
Admiral Enamel DTM
Esmalte alquídico direto ao metal com acabamento brilhante e proteção anticorrosiva.
Sumastic 228
Universal epoxy with corrosion-inhibiting pigments for mechanical surface preparation
Macropoxy 920 Pre-Prime
Selante penetrante para superfícies severamente corroídas com baixa viscosidade
Zinc Clad IV
Revestimento que se regenera para proteção catódica ao aço carbono
Sumadur Micaceous Iron Oxide HS
Fast-drying epoxy with micaceous iron oxide and zinc phosphate for enhanced system protection
Acrolon 355
Poliuretano com boa resistência à intempérie e excelente aparência final. Conforme Eletronuclear.
Sumadur 80 Primer
Low-VOC zinc phosphate epoxy applicable over inorganic zinc as mist coat
Sumastic AWWA
Single-coat epoxy developed for potable water contact with non-toxic pigments
Sher-Loxane 800
Controle eficaz da corrosão a longo prazo com resistência às intempéries. Polisiloxano de alta performance.
Phenicon Finish BR
Epoxy finish with high chemical and abrasion resistance and superior hardness
Sher-Tile HS Finish BR
Low-VOC high-solids epoxy finish meeting Eletronuclear standards for industrial use
Resuflor SL
High-hardness epoxy with excellent chemical and mechanical resistance and high gloss
Sumadur HB for Structures
Excellent coverage epoxy primer and finish for structural metalwork
Sumastic 228 AR
Excelente adesão em superfícies tratadas por limpeza mecânica
Dura-Plate 301K
Epoxy with excellent edge retention, moisture-insensitive, meeting PETROBRAS N-2680 A
Sumatane HB Semi-Gloss
Poliuretano de alta espessura com acabamento semibrilho para condições severas.
Resuflor RE
Self-leveling epoxy repair compound for floor defect correction and surface regularization
Sumatane HS 2677
Excelente resistência ao intemperismo com altos sólidos e baixo VOC
Sumazinc PCP
High heat-resistant zinc primer minimizing smoke generation from zinc during welding
Envirolastic 940 LV
Aplicação em demão única direto ao metal com alta espessura de filme
Sher-Tile Clear HS BR
Solvent-free epoxy sealer for concrete and masonry surfaces
Resuflor TC
Low-cost epoxy with high hardness and abrasion resistance for industrial flooring
Macropoxy 401
High-solids epoxy with zinc phosphate for ISO 12944:2018 C5-H systems. Direct application to blasted/mechanically-cleaned carbon steel. For metal structures, mining, food, bridges, oil/gas.
Acrolon 355 HB SB
High-build polyurethane with excellent weathering resistance and flexibility for severe conditions
Sher-Tile HS Primer BR
Low-VOC high-solids epoxy primer with superior mechanical and chemical resistance